Part of the range: WATPRIM
Packaging
1 L,10 L,5 L
Environment
A+
Sanitary
PV Alimentaire
Dilution / Cleaning
NETT EPPAS DE DILUTION
Application
brosserouleau
Destination
interieur,outdoors if covered with paint
Consumption
6 to 8 m²/L according to porosity
Colours / Finishes
Incolore

Key Features:

  • Excellent bonding performance on blocked substrates, chemical and mechanical resistance
  • Excellent adherence on moist substrate (not wet)
  • Consolidation of chalking and powdery substrates
  • Drying at low temperature
  • Odourless, solvent-free
  • All substrates

DETAILS

Area of application

WATPRIM is a solvent-free two-component epoxy primer that ensures bonding for coatings of the epoxy or polyurethane type on non-absorbent substrates. WATPRIM blocks and insulates substrates.

WATPRIM is perfectly suited for concrete and derivatives, stone, brick, asbestos-cement, steel and ferrous metals, tiling.

On delicate and rusty metal, use WATPRIM.

For any other area of application: ask Cimentol Paints for advice on info@cimentol.fr

Procedure

1. Preparation of the substrate

Applied to good quality sound, dry, mechanical solid and degreased substrates that are dust free and coherent.

 

2. Preparation of WATPRIM

Pour all the hardener into the base.

Mix the two components perfectly using a shaker

3. Application

  • Check the durability of the substrate and conduct the preparation operations in accordance with the table in the FLOOR SYSTEM file
  • Pour the product in small quantities on the floor and spread with a brush or roller, complying with the technical data below in terms of ventilation, temperature, humidity.

 

  1. Recommendations for use
  • Once the base and the hardener have been mixed, the quantity prepared must be used within 45 minutes. Warning: the action of the catalysation (base + hardener) generates a substantial amount of heat in the mixture after about twenty minutes. It is highly advised to apply the product immediately after it has been mixed. The higher the outside temperature is or the higher the quantity of the mixture is, the more the pot life and the practical duration of the product drops.
  • Insert all the hardener into the base.
  • Comply with the technical data below concerning temperature, humidity, etc.
  • Do not incorporate foreign bodies (water, solvent)

Precautions for use

  • Safety/hygiene: solvent-free, non-flammable; keep out of the reach of children, avoid prolonged contact with the skin, wash hand frequently, do not ingest. For professional use only
  • Provide good ventilation of the premises during application
  • Comply with the instructions on the labels and safety sheets

Application of this type of product falls under DTU 59.3. It is the responsibility of the applicator to ensure compliance with these rules, because they are engaging their liability.

For professional use only

Comment l’utiliser

Photos of worksites

EXPLORE OTHER PRODUCTS THAT ARE FREQUENTLY USED TOGETHER

Explore other PAINTS AND VARNISHES FROM THE SAME CATEGORY