,short-nap roller
Key Features:
- 2 in 1: Primer + finish
- High opacity: reduction in the number of coats required and saves time
- Treatment of rusty surfaces thanks to its anti-corrosion principle
- Applied on metal (perfect hold on metal that has expansion constraints thanks to its great flexibility), wood and masonry
- Food grade
- Drying at low temperature
- Highly resistant to UV rays, inclement weather and salt spray
DETAILS
Area of application
PROTECTHAN is a high-performance anti-corrosion polyurethane paint-lacquer (high resistance for protecting and decorating frameworks and cladding, as well as ferrous and non-ferrous metals, guardrails, frameworks, frames, boilerwork, bodywork, etc.), wood, all conventional substrates in construction (windowsill).
PROTECTHAN dries quickly, and can be applied indoors and outdoors, as a primer and a finish.
It can be washed.
For all other substrates: ask Cimentol Paints for advice on info@cimentol.fr
Procedure
1. Preparation of the background
PROTECTHAN is applied on sound, dry, clean and coherent substrates after dust removal and degreasing.
See the preparation table for metals.
2. Use of PROTECTHAN
PROTECTHAN is ready to use for application with a brush, roller or gun.
For application with a pneumatic gun, or better smoothing, dilute to about 5 to 10% with PROTECTHAN DILUENT.
3. Advice for applying PROTECTHAN on metal
|
BACKGROUNDS TO BE PAINTED |
PREPARATION OF THE BACKGROUND |
|
FINISH |
|
Ferrous and new metals (iron and steel) |
Dust removal Degreasing |
A coat of PROTECTHAN diluted to 5% white-spirit as a primer |
Two coats of PROTECTHAN |
|
Oxidised ferrous metals |
Complete stripping with KARAX deruster Dust removal |
A coat of PROTECTHAN diluted to 5% white-spirit as a primer |
Two coats of PROTECTHAN |
|
Non-ferrous metals |
Elimination and passivation of the metal with PASSIVATOR |
A coat of PROTECTHAN diluted to 5% white-spirit as a primer |
Two coats of PROTECTHAN |
|
Deteriorated ferrous metals |
Sanding, leaching |
A coat of PROTECTHAN diluted to 5% white-spirit as a primer |
Two coats of PROTECTHAN |
|
Pre-lacquered steels |
Roughening of the substrate and dust removal |
A coat of PROTECTHAN diluted to 5% white-spirit as a primer |
Two coats of PROTECTHAN |
Precautions for use
- Safety/hygiene: flammable; keep out of the reach of children.
- Comply with the instructions on the labels and safety sheets.
DTU 59.1 “Paintwork” defines the professional rules for preparing substrates.
It is the responsibility of the applicator to ensure compliance with these rules, because they are engaging their liability.
For professional use only
Comment l’utiliser
Photos of worksites
