Part of the range: BIO SOURCEE
Part of the range: EKOTOP BS
Packaging
1 L,10 L,3 L
Environment
A+BiosourcéExcell zone vert
Sanitary
PV Alimentaire
Dilution / Cleaning
water
Application
brossepistolet Airlessrouleau
Destination
exterieurinterieur
Consumption
9 to 12 m²/L
Colours / Finishes
BAT,Tinting on requestwhite

Key Features:

  • New formula with a bio-based resin and natural materials
  • Excellent smoothing and filling power
  • Optimum opacity in white as well as in colours
  • Food grade
  • Satin
  • Scratch resistant
  • Washable
  • Odourless and quick drying = the treated premises are quickly available again
  • Indoor/outdoor multi-substrate

DETAILS

Area of application

EKOTOP GLOSS is a bio-based acrylic polyurethane lacquer finishing paint for indoor and outdoor meticulous and very meticulous work (new and renovation) with a velvet aspect.

It has excellent covering power and results in a perfectly smooth film.

EKOTOP GLOSS is of food grade quality allowing for use in public facilities (cafeterias, wet rooms, kitchens, etc.) or private use.

It is applied to typical substrates:

  • Masonry, plaster and derivatives
  • Wood
  • Iron, galvanised steel
  • PVC
  • Metals covered with a primer, printed wood, printed plaster, printed cement

On porous substrates, first apply the EKOTOP PRIMER undercoat.

For all other substrates, ask Cimentol Paints for advice on info@cimentol.fr

By adding Soludose AIR QUALI, EKOTOP can depollute the indoor air (recovery of formaldehydes, hexaldehydes and acetaldehydes)

Procedure

1. Preparation of the background

EKOTOP GLOSS is applied to any clean, sound, dry and hard substrate, prepared beforehand by scraping or leaching (removal of dust, grease, poorly adherent paint chips, etc.);

 

2. Use of EKOTOP GLOSS

Ready to use with a brush or lacquer roller (polyamide).

For application with a gun, use the product with a 5 to 10% dilution with water.

With porous substrates, the product can be diluted to 1 to 2% with water.

One or two coats can be applied according to the tint of the substrate.

BACKGROUNDS TO BE PAINTED PREPARATION OF THE BACKGROUND PRINT FINISH MAINTENANCE/PROTECTION

(if needed)

Plaster and dry derivatives

Concrete and new derivatives

De-nibbing

Dust removal

One primer coat of EKOTOP PRIMER Two coats of EKOTOP GLOSS One coat of EKOGLASS GLOSS

(if needed)

Wood and new derivatives Sanding

Stripping

Dust removal

One primer coat of EKOTOP PRIMER Two coats of EKOTOP GLOSS One coat of EKOGLASS GLOSS

(if needed)

Old paint in good condition Leaching

Sanding if necessary

Two coats of EKOTOP GLOSS One coat of EKOGLASS GLOSS

(if needed)

Old paint in poor condition Stripping, if needed

Dust removal

One primer coat of EKOTOP PRIMER One coat of EKOGLASS GLOSS

(if needed)

Ferrous metals  

Elimination and passivation of the rust with KARAX or PASSIVATOR

One coat of KARAX PRIMER Two coats of EKOTOP GLOSS One coat of EKOGLASS GLOSS

(if needed)

 

Precautions for use

  • Safety/hygiene: non-flammable; keep out of the reach of children.
  • Comply with the instructions on the labels and safety sheets.

Standard NF P74-201 and 2, ref. DTU 59.1 “paintwork” defines the professional rules for preparing substrates.

It is the responsibility of the applicator to ensure compliance with these rules, because they are engaging their liability.

For professional use only

Comment l’utiliser

Photos of worksites

EXPLORE OTHER PRODUCTS THAT ARE FREQUENTLY USED TOGETHER

Explore other PAINTS AND VARNISHES FROM THE SAME CATEGORY