,scraper
Key Features:
- Ultra-fast drying (heavy traffic 3h)
- Excellent pot life
- Excellent resistance to abrasion, to chemicals, oils and greases
- Indoor/outdoor use: exceptional resistance to UV rays
- Food grade for use in cold rooms
- Application in low temperatures possible
- Low solvent for use indoors and public domain
DETAILS
Procedure
1. Preparation of the substrate
Apply to good quality floors that have been dusted, degreased and coherent.
(See the substrate preparation table in our FLOOR SYSTEM file).
2. Preparation of WATHAN EXPRESS PRIMER
Mix the two components well using a spatula for small packages, and an electric shaker on low speed for 154KG. So that the product is well mixed ( on the edges and at the bottom), pour the preparation into a clean and empty drum.
The quantity prepared has to be used within 30 minutes after mixing and spread immediately in small packets.
3. Application
With a roller or spatula in one coat.
4 . Recommendations for use
- Check the durability of the substrate and conduct the preparation operations in accordance with the table in the FLOOR SYSTEM file.
- Insert all the hardener into the base.
- Comply with the technical data below concerning ventilation, temperature, humidity.
- Do not dilute (water or solvent).
- On a porous substrate, the substrate must absolutely be blocked in order to prevent the bubbling phenomenon.
- In order to mix the product well, once the mixture is done, pour all of it into another container so that the poorly mixed parts (bottom and edges of the bucket) are not applied to the floor.
- Do not apply in rain, fog or humidity. Much longer drying time.
Precautions for use
- Safety/hygiene: solvent-free, non-flammable; keep out of the reach of children, avoid prolonged contact with the skin, wash hand frequently, do not ingest.
- For professional use only
- Apply the product in constantly well-ventilated premises with no humidity
- Comply with the instructions on the labels and safety sheets
Application of this type of product falls under DTU 59.3. It is the responsibility of the applicator to ensure compliance with these rules, because they are engaging their liability.
For professional use only.
